Code & Projects

Hello, and welcome to the code & projects section.

In this section you can see how to connect up your bots to the sensors and get the products up and running. This is designed as a primer to get you up and running quickly. This should give you a good primer to working with hardware and microcontrollers, and we hope that you go on to create some awesome bots in the future!

If you have created a bot that does something awesome, then mail us at bot@botbuilder.co.uk telling us about it. If it is super cool, we will include it in this section for others to see and experiment with.

Ok, let's get started, select a project example from those below...

BoxBot

Project examples for the BoxBot robot chassis. Interested in how the BoxBot was designed and produced? Read the story. Setup & demo:  Just built your BoxBot, lets get it doing something! Project & Code:  Line following with the Photoreflector sensor bar Project & Code:  Object avoidance with the Ultrasonic Sensor Bar

Basebot

Project examples for the BaseBot robot chassis. Coming soon.

Regular 360 Degree Servo

Project examples for the Reqular Servo 360 Degree Servo Calibration:  How to get the center value from your servo

Pro - USER ADJUSTABLE 360 Degree Servo

Project examples for the Pro Servo USER ADJUSTABLE 360 Degree Servo Setup:  How to adjust your servo Code & Projects:  A demo of the servo's capabilities

LCD Display Module 16x2 Characters HD44780

Project examples for the 16x2 LCD Module Code & Projects:  "Hello World" - Coming soon.