|
|
 |
In Stock: 20
|
|
|
|
A USB 2.0 spec A to B type cable. Arduino compatable USB 2.0 compliant cable 1.8 meter - 6' long cable High quality, fully moulded |
|
|
|
|
|
Out of Stock
|
|
|
|
Freeduino V1.16 Board, 100% Arduino compatible ATMEGA 168 Freeduino is a flexible microcontroller board based on ATMEL Atmega168. It is a collaborative open-source project to replicate and publish a completely open version of the Arduino project's closed PCB design.100% functionally, electrically and physically compatible with Arduino Decimilia board. Arduino is one of the most popular prototyping/education platforms 2007. It's a physical computing platform based on a simple microcontroller board, and a development environment for writing software for the board. Arduino community has created a compre- hensive development environment (IDE) for Windows, Mac and Linux, and a library on top of
|
|
|
|
|
|
Out of Stock
|
|
|
|
Introducing BoxBot, a compact robot chassis designed for the Arduino (or any controller that will fit). This kit comes complete with everything you need (excluding simple tools) to construct a fully featured roving robot! Out of the box you can be up and running with the free code examples found in the ‘code & projects’ section in as little as 2hrs. No messy glue, soldering or cutting needed. Simply bolt the kit together, connect up the boards and you are up and running! All BotBuilder bot kits are designed so you can easly modify them. Need to mount some sensor or attachment? See our range of accessories, or make your own. The bots are made from 3mm acrylic making them easy to drill more
|
|
|
|
|
|
In Stock: 3
|
|
|
|
This accessory kit expands your BoxBot with an Photoreflector sensor. This can turn your bot into a line follower, or bot that can detect table edges and stay within a confined space. Easily attached to the front of the BoxBot kit. The sensors can be mounted in 2 places on the sensor bar. At each edge, or in the middle. The middle mount is spaced to allow the bot to follow lines 20mm wide. Electrical insulating tape is normally 19-20mm wide and ideal for line following. The sensors can also be moved up and down to allow many different surfaces to be read. The sensors are infrared photoreflectors, containing two elements, one that emits a beam of infrared light and the other, which detects
|
|
|
|
|
|
In Stock: 10
|
|
|
|
9v battery clip to 2 pcb/breadboard pins. This is a replacement part for powering the servos via a battery. The leads are approx 17cms long. |
|
|
|
|
|
In Stock: 10
|
|
|
|
A 2.1mm DC plug with a 9v battery clip. This is a replacement part for powering the Arduino via a battery. The leads are approx 17cms long. |
|
|
|
|
|
Out of Stock
|
|
|
|
Note: Image shows the BaseBot with optional photorefelective sensors & front switch bar - not included with the base kit. Introducing BaseBot, a mid-sized robot chassis designed for the Arduino (or any controller that will fit). This kit comes complete with everything you need (excluding simple tools) to construct a fully featured roving robot! Out of the box you can be up and running with the free code examples found in the ‘code & projects’ section in as little as 2hrs. No messy glue, soldering or cutting needed. Simply bolt the kit together, connect up the boards and you are up and running! All BotBuilder bot kits are designed so you can easly modify them. Need to mount some sensor or
|
|
|
|
|
|
In Stock: 30
|
|
|
|
A 2.1mm DC plug. The DC jack on the Arduino is 2.1mm so this is ideal for connecting up a power source to it. |
|
|
|
|
|
In Stock: 76
|
|
|
|
This battery connector is designed to be connected to a pp3 9v battery or battery box with the correct pp3 connector. These are used in our kits to power the Arduino (via DC plug) and servos (via Battery box). |
|
|
|
|
|
In Stock: 10
|
|
|
|
A set of new tyres for the BoxBot chassis. Sold in a pair. |
|
|
